Smart-AVI CSW16X16S Manuel d'installation télécharger pdf (Page 21)

www.smartavi.com

SMTCP-2 Front SMTCP-2 Rear

User Administration Menu

Controlling the SMTCP-2 via TELNET

Commands may be sent transparently to the matrix via a TELNET connection to the SMTCP-2.

To use this function, use a telnet client such as Hyperterminal or PuTTY to connect to the IP

address of the SMTCP-2. You will be prompted for a username and password - this will be the

same as the login information via HTTP. Once logged in, the SMTCP-2 is ready to accept the

standard RS-232 commands. For a list of the available commands, please see the user manual

for the matrix you are using. Although the commands are not echoed to the client display, the

commands are being issued to the matrix. Should you need commands to be echoed, please

see the instructions for your TELNET client.

The User Administration menu allows you

to change the user name and password for

the SMTCP-2. The default user name for the

SMTCP-2 is Admin and the password is Pass.

Once you modify the login information, press

the Submit button to make the changes.

Upgrading the SMTCP-2

To updgrade the SMTCP-2 with the latest rmware, contact your sales representative to

obtain the rmware upgrade le or visit the SMTCP-2 product page at www.smartavi.com.

The version information is listed on the Main Menu. Once you have the le, use an FTP client,

preferably TFTP, to navigate to the IP address of the SMTCP-2. To upload the le to the SMTCP-2,

navigate to the /var/ directory, and upload the le rmware.img - IMPORTANT: the le MUST

BE NAMED rmware.img for the upgrade to work properly. Again, the full path MUST BE

/var/rmware.img. Once the le has been copied, restart (power o and power on) the

SMTCP-2. Once restarted the rmware update will be installed. To verify the upgrade, see the

version information listed on the Main Menu.

Controlling the CATSwitch with the SMTCP module (continued)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

Smart-AVI CSW16X16S Manuel d'installation Page 21