Smart-AVI CSW16X16S Manuel d'installation télécharger pdf (Page 12)

www.smartavi.com

Inputs/Outputs: Enter the number of Inputs/Outputs your CATSWITCH has. For now we will assume that there

are 16 inputs and 16 outputs.

Com Port: Select the appropriate com port that your computer is using to access the router.

Router Time out: By default this is 0 meaning the computer acknowledges commands almost instantly.

Sometimes a computer takes longer to respond. This setting should be left at 0. If you need to

change it, it should be no higher than 0.2.

After you have entered in the necessary information click OK. This will now take you to the Main Routing Window

where you can route the dierent video/audio connections.

On this screen you will notice the input buttons running down the left side while the output buttons run across the

top. They are each labeled 1 through 16.

Note: The three small colored buttons at the lower right labeled ALL, VIDEO, and AUDIO are not available if AV Split

was not checked when you congured your router.

Main CATSWITCH window

Software Operation (continued)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Pas de commentaire

Smart-AVI CSW16X16S Manuel d'installation Page 12